Adobe illustrator tutorial for Starters
Adobe Illustrator is a program for drawing, drawing, logo making and designs. As the design rate with Adobe Photoshop is limited, the performance rating in Adobe Illustrator is almost zero. The main task of the illustrator is to draw. Now artists from our country have already stopped using paint and brushes to design a book cover. They design the covers using Adobe Illustrator. Creating an invitation card, advertisement, poster, banner, billboard, etc. cannot be imagined without an image. There are many computer programs for making designs, but the demand for illustrator is at an all-time high for resources and variety. That is why Illustrator is so popular all over the world.
To start, finish, and change or merge a color in the dialog box, gradient editing can be done. Getting the job done .
The Gradient Editor Dialogue box can be viewed by on the gradient bar.
Color Stop triangles can be viewed to the left and right of the gradient editorial slide dialog box, and Opacity Stop triangles are located at the top of the same dialog box. Suppose the first color of a straight gradient is red and the finished touch is yellow. To use blue instead of red the Color Stop Triangle at the left end of the gradient slide, the color swatch will apply at the end. the Color swatch and select the Stop Color dialog box to be viewed.
To select a blue color in this dialog box, the Ok button, and then blue in the Set Color at the left-hand side of the gradient bar.
Now drag the gradient tool from one side to the other, and a combination of blue and yellow will form. If you select Color Stop at the bottom edge and Opacity Stop on the upper edge of the gradient slide, a diamond status icon will be displayed in the middle. This icon shows the center point of the gradient from where the color starts to spread.
To select the center point icon, type the position adjustment digit in the center box to adjust the center. The center point can be changed by dragging the icon to the left or right.
Adding and removing new colors and color schemes:
If more than two gradient colors can be used, add new Color Stops to the slide. To do this -
anywhere at the bottom of the slide, a new Color Stop color will be placed next to the diamond to determine the color mixing point in the center. In the same way, the Color Sort of the required number can be added to the gradient slide.
If you need any additional Color Stop to remove or crop, that color stop icon and drag it out of the slide, and Color Stop will be removed.
In addition to typing in the Illustrator system using the keyboard, typing is possible as does the artist using a brush. The font size and shape can be changed as needed. Like other programs, open Illustrator and start creating new files.
Open illustrator program:
1. A menu will be displayed when you on the Start button at the left end of the mouse pointer.
2. You will find a navigation menu that sets the mouse pointer to All Settings in this menu.
3. By using on the Adobe Master Collection menu in this menu, find another flight menu. You will find a list of Adobe applications in this menu.
4. When you use on Adobe Illustrator in the list, the program will open.
Assign a new command from the file menu or press Ctrl N, and a new dialog box will be displayed. In new dialog box - Type a name in the dialog box, for example, Ankon-1. Any name can be used instead.
An easy-to-remember or word-related word can be given. Finding the next file will be easier on this.
The drop-down list will be viewed by using the drag-down arrow of the size box. A different paper size will be viewed here. The required paper size should be selected by name, and the height and width of the paper will appear in the box.
Measurement units are available in the Units box. Users of our country are accustomed to measuring inches, but points, picas, millimeters, inches, pixel, etc. It can be used to work accurately. use the drop-down arrow in the unit box, and the drop-down list will appear.
The requisite unit of measurement can be fixed from the list.
Pictures of two persons are viewed on the right orientation. If you use the first one , the position of paper will be portrait.
Two options are displayed as RGB and CMYK in color mode. CMYK mode is good for printing, but RGB mode is better for electronic or computer screen, the differences between these methods are not well distinguished.
To adjust the rating, press OK in the dialog box, and it will disappear. A new window will arrive.
In the New dialog box name, type the file name, and it will be displayed in the title bar to the right of Adobe Illustrator above the menu bar. If any file name is not typed `Untitled ... 'it will be displayed in the title bar.
Work tools:
A new blank file will be available on screen after creating a new file. Many items like menu bar, toolbox, floating palette, navigation bar, etc.
Title bar:
After opening the Illustrator Program, on the top left of the screen, other document details with the application name can be viewed in the title bar, for example, Adobe Illustrator- [Ankon-1 ® 70 (KGB / Preview)]. Here, Adobe Illustrator is the name of the application, Ankon-1 is the file name if the name was given at the time of its creation, and @ 70 (CMYK / Preview) is the visible area size and color mode presentation. The entire section extends to the right of the title bar.
If any name is not provided during the opening of the file, it can be provided after completion of the task and saved again. Files are given different names, and when a file is opened, its name is displayed in the title bar to the right of the application.
Different types of tools and design and drawing options are listed in Toolbox & Palette. Designing and drawing can be done using these tools and options, and editing work is possible to get the image the way we expect.
Names of necessary tools:
The required tool names should be known before starting work. Ellipse, polygon, star, and maturation tools sit right in the toolbox. This is called 'Group Tools'. The right-hand triangle is attached with these tools. If a triangular mark is attached to a tool, it means that most of the tools are kept in the same place. If you use on the visual tool in the box and keep pressing the mouse, all the tools will be viewed together. Drag the mouse cursor to the tool needed to use , the tool will appear in the toolbox. There are some icons in the swatch below the toolbox tools. Coloring an item or the edge of an item or canceling an order can be done with these symbols. Create an object to understand the use of icons. To do something like this -
use on a rectangular tool with the mouse pointer, and the tool will be selected.
To bring the mouse pointer into the screen, and after use somewhere drag it diagonally below an inch, and remove the finger pressure from the mouse, a rectangular or square object will be formed.
The item will be selected and filled with color.
Four empty boxes will be viewed in the four corners of the selected item. Four small solid boxes will be viewed in the four corners.
When an item is free to select, use the Direct Selection Tool in the toolbox with the mouse pointer, and select Direct Selection Tool. Now bring the mouse pointer into the screen, use an item with the Direct Selection Tool, and the item will be selected. In this case, use the Selection Tool again, and you will see four solid boxes in the arms and four strong boxes in the corners.
Filling color on objects :
Fill and stroke -
The edge or border of an object is called a 'Stroke' and the inner part is called the Use of 'Fill' and 'Stroke' swatch related to the color palette. If the color palette can be viewed on the screen, or give a color command from the window menu or press the F6 key, then the color palette will be visible. use Complete swatch and it will be opened and viewed above. So only filling work can be done. Although the object can be filled, not a stroke. Similarly, by use on the Stroke swatch, use it and stay on top of completing the swatch. Therefore, the color can be placed on the stripes of the object. You will not be able to fill an item with color from here.
When the Fill swatch is active and the color you will use on the Color Spectrum Bar of the color palette, the interior of the selected item will be filled with that color. Similarly, when the stroke function is active and the color you will use on the Color Spectrum Bar, the stripes of the items will be filled with that color. The color inside the item will remain unchanged.
Stoke can be great with a clear view. To have this effect, select the stroke command from the Window menu, and the Stroke palette will be displayed on the screen. Select at least 10 from the weight drop menu in the Stroke palette. At this stage, if the color is added or changed, it will look good.
Color, Gradient, and No Color:
Gradient and None are three icons respectively under the Fill and Stroke swatch. use on the color and the Gradient icon works differently with the color palette and Gradient. the None icon, and filling in the selected item or stoke color may not work or cancel. If an object is full of color or gradient, color will be displayed. If an item is selected, the color will be changed as well.
Increasing and decreasing the size of the object:
Many minute activities are done to create something. Performing minute tasks can be difficult with a normal object size. When a part of an object is considered large, it makes it easier to do the work. Viewing a page in enlarged size while working on Illustrator is called Zoom in, and Zoom in image with a reduced size. The item will also look bigger or smaller with increasing or decreasing size. To view an object large or small, the visual size of the page will be made larger or smaller by using the Zoom Tool. Zoom Tool will be selected by use on the Zoom Tool box.
After selecting Zoom Tool when the mouse cursor is brought to the screen, it will look like a flint-glass, and a plus sign (+) will appear on the screen.
Press the Alt key while the Zoom Tool is running, and the Zoom Tool will be converted to Zoom Out Tool. Keep pressing the Alt key and then use with Zoom Out Tool, the screen size will be slightly smaller. Press the Ctrl - or Ctrl = button to complete the Zoom out and Zoom in task.
Changing the positioning of page:
If the page size is too small or too large, the required portion of the item may go outside the visible area. In this case, to move the object to the correct location on the screen
Select Hand Tool and on Hand Tool Box. By on the required object with the Hand Tool and dragging it to the correct position, release the finger pressure on the mouse. This way, the actual page layout will be changed. The item cannot be changed in any other way.
Mode of viewing objects:
There are some ways to view objects in the Illustrator program. Any of these can be selected from the view menu as needed.
In Outline Mode, an item is considered as a straightforward frame or shape. In this mode, the layout or layout of an object, especially the detailed function of arranging a line or path can be easily done.
Item fully viewed in Pixel preview mode or preview mode.
An image viewed in Overprint preview mode can be printed.
Creating object:
In the preparatory phase for creating an object, the initial process of making different types of shapes should be studied, for example, square, rectangle, circle, elliptic, multi-angular, star, spiral, etc. Building an Rectangular Tool will have to be selected when you on the mouse pointer. To bring the mouse pointer into the screen and anywhere, drag it diagonally below an inch and release the mouse pressure, and it will form a square or rectangular object. In the same process, select another item item in the toolbox and perform other items. Nothing can be built once. By erasing something slowly or completely, we can start in a new way. To get the job done, you need to learn to erase everything or part of the object.
Selecting objects and erasing borderline or path:
If an item is full of color, the item will be selected by on the Selection Tool or the Specific Selection Tool. Continue to press the Alt key and on the object path, everything will be selected. To clear an object or component path, select it through the Selection Tool or the Specific Selection Tool. Press the Backspace or Delete button, Path or section will be deleted.
When the Backspace or Delete button is pressed, the item is deleted. Select Cut command in the Edit menu, and the item goes to the temporary memory called clipboard and stays there until the other item is not cut or copied. When an item sits on the clipboard, choosing to paste a command from the edit menu will return the item to the document.
Path
An item line can be made up of more than one component. One component can also be used if necessary. The boundary of the object is called the Path. A straight line is also called a Path.
Selecting tool:
Selection Tool, Direct Selection Tool or Group Selection Tool can be used to select an item or part of an item.
The selection tool is called the Black Arrow. on the selection tool with the mouse pointer to use the tool, and it will be selected. When the mouse pointer is brought to the screen after selecting the tool, the mouse pointer picks up the shape of the black arrow or tool of choice by on that and it will be selected. The Selection Tool is used to select everything.
When any item is selected with the Selection Tool, a rectangular, circular or binding box is made around the object. Four empty boxes in four corners and four in four arms will be visible. These boxes are called Resize Box. and dragging in the size boxes, the item size can be increased and decreased. Keep pressing the shift and drag, the object will be larger or smaller depending on the scale.
on the selected item with the Selection Tool or on any arms or any part of the object and dragging it, will be transferred to any.
By selecting more than one item together:
After selecting the first item, continue to press the switch button and select the next item. In this way, select the most necessary items. When all items are selected only one square box will borrow.
Direct Selection Tool:
The white tool on the right of the selection tool is called the Direct Selection Tool. This tool is called the White Arrow.
The Direct Selection Tool or the White Tool is used to select part of an object or all. Part of an item can be enlarged separately or shortened by selecting any focus point with the Direct Selection Tool.
Collection Object:
To create a group of objects after creating a circle, circle, square, and rectangle:
A. Select all or most needed.
B. Selected items will be collected when the Group command is given in the Object menu. By on the blank space, make all items random, and then on any object with a black arrow or a selection tool, a rectangular box will be built around the collected items. Therefore the items inside the selection box will be selected together.
To classify items:
A. on an item, and then the collected items will be selected.
B. Provide the Ungroup command from the Object menu, and the collected items will be sorted.
Color palette:
If the color palette can be viewed on the screen, give the command of the Window menu color, and the color palette will arrive. In the upper left of the Color Palette, the Fill and Stroke or Swatch reference box is available. Color Slider and Bar Spectrum Bar are located below it. When work is done in grayscale mode, only one color slide will be viewed. When done in RGB = Red Green Mode, 3 color slides will be viewed, and when done in CMYK mode, 4 color slides will be viewed.
Fill in Color :
Fill in the color on any object:
A. Select the item.
B. on the Color Palette Completion Fillboard Fillboard, activate it. Fill Swatch functionality will remain above the Stroke icon.
C. the required color in the Color Spectrum Bar.